86-512-66386808
Plant 5, No. 413, Mudong Road, Mudu Town, Wuzhong District, Suzhou, Jiangsu, China (Mainland)
25/8 PE Insulation Heat Shrink Cable Cap
MDRS-CAP, 25/8 PE Insulation Heat Shrink Cable Cap, with flat adhesive coating inside, are typically used to seal cable terminals against moisture etc. Heat Shrink Cable Cap.
Electric Wire End Cap, Electric Wire End Cap, Electric Wire End Cap, Electric Wire End Cap
Features
² Good sealing, waterproof, moisture proof
² Ultraviolet resistant and weather resistance
² RoHS compliant
² Continuous Operating Temperature: -55°C~110°C
² Shrink Temperature: 120°C
² Standard colors: Black
Electric Wire End Cap, Electric Wire End Cap, Electric Wire End Cap, Electric Wire End Cap
Technical Data
Test Properties | Test Method | Typical Data |
Tensile Strength | ≥14MPa | ASTM D 412 |
Elongation at break | ≥400% | ASTM D 412 |
Density | 1.05g/cm3 | ASTM D 792 |
Elongation after heat ageing | ≥300% | ASTM D 412 |
dielectric strength | ≥15kV/mm | IEC 60243 |
Volume Resistivity | ≥1014Ω .cm | IEC 60093 |
Dimensions
Electric Wire End Cap, Electric Wire End Cap, Electric Wire End Cap, Electric Wire End Cap
Electric Wire End Cap, Electric Wire End Cap, Electric Wire End Cap, Electric Wire End Cap
Electric Wire End Cap, Electric Wire End Cap, Electric Wire End Cap, Electric Wire End Cap
Electric Wire End Cap, Electric Wire End Cap, Electric Wire End Cap, Electric Wire End Cap
WWW.SHRINKMARKET.COM
